Automatic Ambulance Rescue System Using Arduino Microcontroller

Call for Price

In this system, we are monitoring the vehicle and if the vehicle gets accident the alert will be sent to the nearby ambulance the traffic signal will be controlled by the RF module. 

Shipping: 4 to 8 working days from the date of purchase

Package Includes:

  • Complete Hardware Kit

  • Demo Video-Embedded Below

  • Abstract

  • Reference Paper

  • PPT (20 Slides)

  • !!! Online Support !!!

SKU: Automatic Ambulance Rescue System Using Arduino Microcontroller Category:

Description

Abstract

This system consists of traffic congestion that was recognized as major problems in modern urban areas, which have caused much uncomfortable for the ambulance. Moreover, road accidents in the city have been nonstop and to bar the loss of life due to accidents is even more crucial. We are implementing the AARS system is called (Automatic ambulance rescue system). The main aim of this scheme is to provide a smooth flow for the ambulance to reach the hospitals in time. The aim of implementing which would control mechanically the traffic lights in the path of the ambulance. The ambulance is controlled by the central unit which furnishes the scantest route to the ambulance and also controls the traffic light according to the ambulance location and thus reaching the hospital safely. From SMS we are, identifying the location of the accident spot through the sensor systems in the vehicle which encountered the accident and thus the server walks through the ambulance to the spot. This system is fully automated, to finds the accident spot, controls the traffic lights, helping to reach the hospital in time.

Existing System

There is a loss of life due to the delay in the arrival of an ambulance to the hospital in the golden hour. The ambulance in the traffic signals. It would be of nice use to the ambulance if the traffic signals within the path of the hospital are ON. Post Accident Detection Systems Lack of Intelligence within the detection systems. Fails to trace the collision and pre-damage status. method of observation folks to be manual time delay (first aid).

Proposed system

This system is controlling the traffic signals and achieving the above-named task in order that the ambulance would be able to cross all the traffic junctions without waiting. The ambulance is radio-controlled to the hospital by the server through the shortest route. The vehicle unit put in within the vehicle senses the accident and sends the location of the accident to the most GSM.

Block Diagram

Ambulance Section

block diagram of Automatic Ambulance Rescue System Using Arduino Microcontroller

Vehicle Section

block diagram of Automatic Ambulance Rescue System Using Arduino Microcontroller

Signal Section

block diagram of Automatic Ambulance Rescue System Using Arduino Microcontroller

Hardware Tools                                     

  • Arduino Uno
  • Mems Sensor
  • GSM Modem       
  • GPS Modem
  • RF Module
  • Encoder/ Decoder
  • LCD display
  • Traffic Light

Software Tools

  • Arduino IDE
  • Embedded C

Applications

  • Anti-theft systems
  • Crash recorders
  • Dead reckoning
  • Bio-medical applications

Additional information

Weight 1.000000 kg

Reviews

There are no reviews yet.

Be the first to review “Automatic Ambulance Rescue System Using Arduino Microcontroller”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.