Arduino-UNO based Magnetic Field Strength Mesurment
Call for Price
.
Shipping: 4 to 8 working days from the date of purchase
Package Includes:
-
Complete Hardware Kit
-
Demo Video-Embedded Below
-
Abstract
-
Reference Paper
-
PPT (20 Slides)
-
!!! Online Support !!!
Description
ABSTRACT:
The Arduino based gaussmeter is used to measure magnetic field using Hall Effect sensor. In this project the 8-bit ARDUINO UNO(Microchip Technology Analog to Digital Converter) is used. The sensitivity of 12-bit ADC is 819 and operating voltage is 1.22mv.Now the circuit is generally works at 3v & 5v. The WSH 315 Hall Effect sensor has three terminals vcc, ground and vdd. So, one Gauss means 1.5mv.The LCD (Liquid Crystal Display) is used to shows the magnetic field in CGS (Centimeter Gram Second) system. The device is used in physic lab for conducting magnetic field experiment.
INTRODUCTION:
The Arduino based gaussmeter is used to measure magnetic field using Hall Effect sensor. In this project the 8-bit ARDUINO UNO(Microchip Technology Analog to Digital Converter) is used. The sensitivity of 12-bit ADC is 819 and operating voltage is 1.22mv.Now the circuit is generally works at 3v & 5v. The WSH 315 Hall Effect sensor has three terminals vcc, ground and vdd. So, one Gauss means 1.5mv.The LCD (Liquid Crystal Display) is used to shows the magnetic field in CGS (Centimeter Gram Second) system. The device is used in physic lab for conducting magnetic field experiment.
BLOCK DIAGRAM:
Hardware Tools
- Arduino Uno
- WHS 315 Sensor
- ADC Module
Software Tools
- Arduino IDE
- Embedded-C
Additional information
Weight | 1.000000 kg |
---|
Reviews
There are no reviews yet.