L80 GPS Module with Baseboard
₹1,000.00 Exc Tax
L80 GPS Module with Baseboard
Out of stock
Description
Module Features of L80 GPS Module with Baseboard
- Embedded patch antenna: 15.0 x 15.0 x 4.0mm
- Extremely compact size: 16.0 x 16.0 x 6.45mm
- Automatic antenna switching function
- Support short circuit protection and antenna detection
- Built-in LNA for better sensitivity
- Ultra low power consumption in tracking mode, 20mA
- Always Locate™, an intelligent controller of periodic mode
- Support DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN)
- Anti-Jamming, Multi-tone Active Interference Canceller
Baseboard Feature
- On board RS232 level conversion using Max 232 IC
- On board reset switch
- Computable for Zigbee, Bluetooth, Wi-Fi, GPS modules
- Indication LED Transmitting and Receiving data’s
- It’s need external +5C/1A DC Adapter
General Specifications
L1 Band Receiver (1575.42MHz):
- Channel : 22 (Tracking) / 66 (Acquisition)
- C/A code
- SBAS : WAAS, EGNOS MSAS,GAGAN
Horizontal Position Accuracy :
- Autonomous: 2.5 m CEP
Acceleration Accuracy :
- Without aid : 0.1 m/s2
Timing Accuracy :
- 1PPS out :10ns
Reacquisition Time :
- 1s
Sensitivity :
- Acquisition :-148dBm
- Tracking :-165dBm
- Reacquisition :-160dBm
Environmental :
- Operating Temperature -40°Cto 85°C
- Storage Temperature -45°Cto 125°C
Dynamic Performance :
- Maximum Altitude Max.18000m
- Maximum Velocity Max.515m/s
- Maximum Acceleration 4G
Dimensions :
- 16.0 x 16.0 x 6.45mm
Weight :
- 6.0g
Serial Interfaces
- Serial Interfaces :UART: Adjustable 4800~115200 bps Default: 9600bps
- Update rate : 1Hz (Default), up to10Hz
- I/O Voltage : 2.7V ~ 2.9V
- Protocols :NMEA 0183 PMTK
Power Management
- Power supply : 2.8V ~ 4.3V
- Power Acquisition :25mA
Additional information
Weight | 1.000000 kg |
---|
Reviews
There are no reviews yet.