Raspberry Pi based Agriculture Monitoring System
Raspberry PI Based Agriculture Risk Monitoring Through Wireless Communication
100 in stock
Raspberry pi based multi parameter monitoring using RS232 and microcontroller that measures and controls various global parameters. The system comprises of a single master and multiple slaves with wireless mode of communication with Raspberry pi. The parameters that can be tracked are Humidity sensor, Temperature Sensor, and IR sensor. Master node collects the parameter data from the slave node. Here raspberry pi act as a master node and slave node is ARM controller.
The Raspberry Pi is a credit card sized single computer or SoC uses ARM1176JZF-S core. System on a Chip is a method of placing all necessary electronics for running a computer on a single chip. Raspberry Pi needs an Operating system to start up. In the aim of cost reduction, the Raspberry Pi omits any on-board non-volatile memory used to store the boot loaders, Linux Kernels and file systems as seen in more traditional embedded systems. Rather, a SD/MMC card slot is provided for this purpose. After boot load, as per the application program Raspberry Pi will get execute.
This projects proposes that the Agriculture risk monitoring system by using Interfacing Raspberry and ARM7 controller to monitoring the farm issues.
Existing System :
In the existing system Global Agriculture Process is Monitor by ARM controllers. To monitor through ARM controller we need some extra softwares and PC.
Proposed System :
In our Raspberry pi based multi parameter monitoring using RS232 and microcontroller that measures and controls various global parameters.
- Easy to monitor & control
- High efficient
Block Diagram :
Slave Section :
Master Section :
Block Diagram Explanation :
This system consists of raspberry pi, ARM microcontroller and parameters of global process. The parameters that can be tracked are Humidity sensor, Temperature Sensor,Infrared sensor. Those parameters are measured by individual sensors along with ARM controller. And then all sensors value send to raspberry pi through serial communication. Raspberry pi is a master node, in that node the whole system is controlled by Arm11 processor and this processor is implemented on Raspberry Pi Board. So this board is connected with monitor, camera, and SD card. Those all components are connected by USB adaptors. The parameters value from the arm controller is displayed in monitor and control through raspberry pi.
Temp Sensor- To Find whether the Heat in farm
Humidity Sensor-To find Water sensitivity in grass and Farm
IR Sensor- To Find whether the water is flowing through Pipes
- Raspberry Pi
- ARM LPC2148
- Temperature sensor
- Humidity Sensor
- IR sensor
- SD card
- USB adapters
- Wheezy Raspbian
- Language – Linux , Embedded C
- Compiler(KEIL IDE)
- Programmers(Flash Magic)
- Industrial applications