NANO32 ESP32 IoT Development Board

2,900.00

NANO32 ESP32 IoT Development Board

Out of stock

SKU: NANO32 ESP32 IoT Development Board Category:

Description

NANO32 ESP32 IoT Development Board

he NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo ‘wonder’ chip.

QUICK OVERVIEW

  • ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
  • 40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
  • 4MB Flash (32MBit)
  • FTDI231 for the USB to Serial communication
  • Auto-reset for automatic flash of new program
  • On board 3.3V, 0.5A LDO, tested to work upto 1A
  • 2.5dBi Peak Gain, 0.5dBi averange gain antenna

Specifications and Features

  • ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
  • 40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
  • 4MB Flash (32MBit)
  • FTDI231 for the USB to Serial communication
  • Auto-reset for an automatic flash of the new program
  • Onboard 3.3V, 0.5A LDO tested to work up to 1A
  • 2.5dBi Peak Gain, 0.5dBi average gain antenna
  1. Key Features of ESP32 SoC:

    • Xtensa® Dual-Core 32-bit LX6 microprocessors, up to 600 DMIPS
    • Integrated 520 KB SRAM
    • Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIP
    • Integrated dual mode Bluetooth (classic and BLE)
    • 4 MByte flash (32Mbit)
    • 2.2V to 3.6V operating voltage
    • -40°C to +125°C operating temperature
    • 32 GPIO
  2. ESP32 Wi-Fi :  

    • 802.11 b/g/n/e/i
    • 802.11 n (2.4 GHz), up to 150 Mbps
    • 802.11 e: QoS for wireless multimedia technology
    • WMM-PS, UAPSD
    • A-MPDU and A-MSDU aggregation
    • Block ACK
    • Fragmentation and defragmentation
    • Automatic Beacon monitoring/scanning
    • 802.11 i security features: pre-authentication and TSN
    • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
    • Infrastructure BSS Station mode/SoftAP mode
    • Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P
    • Power Management
    • UMA compliant and certified
    • Antenna diversity and selection
  3. ESP32 Bluetooth :

    • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
    • Class-1, class-2 and class-3 transmitter r without external power amplifier
    • Enhanced power control
    • +10 dBm transmitting power
    • NZIF receiver with -98 dBm sensitivity
    • Adaptive Frequency Hopping (AFH)
    • Standard HCI based on SDIO/SPI/UART
    • High speed UART HCI, up to 4 Mbps
    • BT 4.2 controller and host stack
    • Service Discover Protocol (SDP)
    • General Access Profile (GAP)
    • Security Manage Protocol (SMP)
    • Bluetooth Low Energy (BLE)
    • ATT/GATT
    • HID
    • All GATT-based profile supported
    • SPP-Like GATT-based profile
    • BLE Beacon
    • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
    • CVSD and SBC for audio codec
    • Bluetooth Piconet and Scatternet 
  4. GPIO Peripherals :

    • 3 x UARTs, including hardware flow control
    • 3 x SPI
    • 2 x I2S
    • 12 x ADC input channels
    • 2 x DAC
    • 2 x I2C
    • PWM/timer input/output availabe on every GPIO pin
    • OpenOCD debug interface with 32 kB TRAX buffer
    • SDIO master/slave 50 MHz
    • Supports external SPI flash up to 16 MB
    • SD-card interface support
  5. Security Related :

    • IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
    • Secure boot
    • Flash encryption
    • 1024-bit OTP, up to 768-bit for customer
  6.     Cryptographic hardware acceleration:

Additional information

Weight 1.000000 kg

Reviews

There are no reviews yet.

Be the first to review “NANO32 ESP32 IoT Development Board”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.