While doing the program for blinking LED interfacing MATLAB and TMS320CF2812.I dont have Embedded IDE link in my MATLAB.how to get that link in my MATLAB simulink.
Try to uninstall the MATLAB and Reinstall it. While installing MATLAB choose all the SIMULINK blocks[Embedded IDE link].
what MATLAB version you using ?
what code composer studio version you using ?
Yes the procedure are same.
Did you followed this "Try to uninstall the MATLAB and Reinstall it. While installing MATLAB choose all the SIMULINK blocks[Embedded IDE link]." ?
whether your MATLAB shows the EMBEDDED IDE Link ? i attached simple led simulink model file try to work with this.
I got Embedded coder instead of Embedded IDE link in my toolbox setup.while doing the program of "Generation of Six Fixed PWM using MATLAB for TMS320F2812" i have the following error when i am connecting the target.please reply...
the error is
Error connecting to the target:
Fatal Error during: Initialization, OCS,
This error was generated by TI's USCIF driver.
This utility has failed to open its kernel mode driver.
Either it has been disabled or an install/un-install failed.
Sequence ID: 0
Error Code: -141
Error Class: 0x80000240
I/O Port = 240
Board Name: F2810 XDS510 Emulator
Cpu Name: CPU_1
Before incremental build in MATLAB , first connect the target with code composer studio then open a matlab and check with the following Matlab commands.
checkEnvSetup('ccs', 'F2808 eZdsp', 'list')
checkEnvSetup('ccs', 'c6416', 'check')