Spartan3 FPGA Starter Kit
Call for Price
The Spartan 3 Starter Kit is a low-priced, compact prototyping module that can be used for rapid proof of concept or for educational environments. The module is based on the Spartan 3 FPGA from Xilinx along with supporting circuitry to ease prototyping efforts. Designers can use the Spartan-3 kit for general FPGA prototyping, experimenting with multiple FPGA configuration techniques, and proving out low cost design methods.
Description
Description
The Spartan 3 Starter Kit is a low-priced, compact prototyping module that can be used for rapid proof of concept or for educational environments. The module is based on the Spartan 3 FPGA from Xilinx along with supporting circuitry to ease prototyping efforts. Designers can use the Spartan-3 kit for general FPGA prototyping, experimenting with multiple FPGA configuration techniques, and proving out low cost design methods.
Key Features
- 8 Nos. Point LEDs (Logic Output)
- 8 Nos. Digital Input(DIP Switch)
- One UART(RS232)
- VGA Interface
- Reset Button | Power-on Indication
- PS/2 (Keyboard Interface)
- 40-Pin Expansion Connector
- JTAG (Program/Debug)
- 3 Nos. 20pin- I/O Expansion Connector
- On-Board Voltage regulators
- +5V | +3V3 | 2V5 | 1V2
Benefits
- Evaluate Real Time Applications
- Supports VHDL, VERILOG & Schematic
- JTAG Programming/Debugging
- Easy Add-on Card Interface
FPGA Module
- Device
- Spartan3 (XC3S200-TQ144)
- Up to 97 user defined I/O signals
- Memory : 1MB – PROM
- Clock : 50MHz crystal
Kit Includes
- Spartan3 Starter Kit
- Power Adaptor 9V
- Parallel JTAG Programmer
- RS232 Cable
- Hardware / Experiments Manual
- CD Contains:
- Examples.
- Datasheets.
- Software.
Note: By default kit supplied with Parallel JTAG Programmer. If your PC doesn’t have Parallel Printer Port, you need to purchase USB JTAG Programmer.
Additional information
Weight | 0.650000 kg |
---|
Reviews
There are no reviews yet.