Raspberry Pi based Industrial Process Monitoring System

11,798.00

Raspberry Pi Based Global Industrial Process Monitoring Through Wireless Communication

100 in stock

SKU: Raspberry Pi - Industrial Monitoring through wireless Category:

Description

Synopsis :

             Raspberry pi based multi parameter monitoring using RS232 and microcontroller that measures and controls various global parameters. The system comprises of a single master and multiple slaves with wireless mode of communication with Raspberry pi. The parameters that can be tracked are current, voltage, temperature, light intensity and water level. Master node collects the parameter data from the slave node. Here raspberry pi act as a master node and slave node is ARM controller. The Raspberry Pi is a credit card sized single computer or SoC uses ARM1176JZF-S core. System on a Chip is a method of placing all necessary electronics for running a computer on a single chip. Raspberry Pi needs an Operating system to start up. In the aim of cost reduction, the Raspberry Pi omits any on-board non-volatile memory used to store the boot loaders, Linux Kernels and file systems as seen in more traditional embedded systems. Rather, a SD/MMC card slot is provided for this purpose. After boot load, as per the application program Raspberry Pi will get execute.

Existing System :

            In the existing system Global Industrial Process is Monitor by ARM controllers. To monitor through ARM controller we need some extra software and PC.

Proposed System :

            In our Raspberry pi based multi parameter monitoring  using RS232 and microcontroller that measures and controls various global parameters.

Advantages :

  • Easy to monitor & control
  • High efficient

Block Diagram :

Slave Section :

                                       Raspberry Pi Based Global Industrial Process Monitoring Through Wireless Communication 1

Master Section :

                          Raspberry Pi Based Global Industrial Process Monitoring Through Wireless Communication 2

Block Diagram Explanation :

            This system consists of raspberry pi, ARM microcontroller and parameters of global process. The parameters that can be tracked are current, voltage, temperature, light intensity and water level. Those parameters are measured by individual sensors along with ARM controller. And then all sensors value send to raspberry pi through serial communication. Raspberry pi is a master node, in that node the whole system is controlled by Arm11 processor and this processor is implemented on Raspberry Pi Board. So this board is connected with monitor, camera, and SD card. Those all components are connected by USB adaptors. The parameters value from the arm controller is displayed in monitor and control through raspberry pi.  

Hardware :

  • Raspberry Pi
  • ARM  LPC2148
  • Temperature  sensor
  • LDR
  • Level sensor
  • SD card
  • Monitor
  • USB adapters

Software :

  • Wheezy  Raspbian
  • Matlab
  • Language – Linux , Embedded C
  • Compiler(KEIL IDE)
  • Programmers(Flash Magic) 

Applications :

  • Industrial applications

Additional information

Weight1.000000 kg

Reviews

There are no reviews yet.

Be the first to review “Raspberry Pi based Industrial Process Monitoring System”

Your email address will not be published. Required fields are marked *

thirteen + 6 =

This site uses Akismet to reduce spam. Learn how your comment data is processed.