Description

Abstract

Nowadays the railway department facing in railway track problem. But In this project, we have used the sensor to monitoring the railway track. If it’s any crack on the track means the IR sensor finds and sending to the microcontroller the controller transmitted the data through Zigbee communication to the receiver part. Zigbee communication means two types of section’s one is the transmitter and receiver part. Zigbee is a bidirectional device. Automatically IR sensor and ultrasonic sensor using to find the crack and obstacle detection then data are transmitted through the Zigbee transmitter. Another end we having the receiver part of Zigbee that the receiver receives the data’s and it sends it to the microcontroller. This system we added the buzzer if any abnormal value is received by the transmitter buzzer will make alert

Block diagram

Transmitter section

                                                                              

 Receiver section

Demo Video

Block diagram description

In this project, we are used two Arduino Uno, one Zigbee pair, IR sensor, and Ultrasonic sensor this is using to find the crack and obstacle detection if any abnormal condition will happen means the receiver side buzzer will blow

Hardware

• Arduino Uno
• IR sensor
• Ultrasonic sensor   
• Buzzer

 Software

• Arduino IDE
• Orcad design