You have no items in your shopping cart.

Subtotal: 0.00

DC Regulated Power Supply

Front Panel Description:



blockdiagram-for-dc-regulated-power-supply

Item

Description

1

This display indicates the voltage that is supplied to the external circuit.

2

This display indicates the current that is supplied to the external circuit.

3

This Led indicates if the rated current level is exceeded or if any short circuit in the external circuit or Overloaded.

4

Power Switch is to ON/OFF the output power.

5

This tune knob is turned clockwise to increase the voltage level. There is coarse and fine adjustment Knob.

6

This tune knob is turned clockwise to increase the current level. There is coarse and fine adjustment Knob.

7

Here the regulated output is terminated with a banana connector.



Working

  • Connect the power cord to the power supply and make sure the POWER switch is pressed.
  • Power supply has variable voltage and current control.
  • The output voltage is variable from 0 to 30V DC.
  • The output current is also variable.
  • The measuring unit displays the output voltage and output current.
  • Even if there is any short circuit in the external circuit the led and buzzer is set to ON for indication.

After use

  • Once all the operation is completed, Switch off the whole power supply unit and remove all the connections from the unit.
  • Store in a dry, well air and non-dusty environment.

Note

If the Power supply is not working check the fuses at the back side and replace the fuse at specified rating.