Switched Reluctance Motor Control Development Kit

225,000.00 Exc Tax

This module is designed for Four Phase Switched Reluctance Motor Speed control application up to 1 HP ratings by using the latest IGBT. Any external PWM controller can be interfaced with this power module for SR Motor open / closed loop speed control application.

Out of stock

SKU: PED001 Category:

Description

This setup consists

  • dsPIC30F4011 based controller
  • SRM Power module.
  • Four Phase 1 HP SR Motor with Spring Balance load.

Controller

  • Micro Chip dsPIC30F4011 16 Bit signal controller operating @ 20 MIPS.
  • 48KB Flash memory
  • 1 KB data EEPROM
  • 24 KB RAM for data memory
  • 16 bit timer counter
  • 6 Motor control/PWM with programmable dead band terminated at 20 pin FRC Connector
  • 2 capture inputs terminated at 20 pin FRC connector.
  • 6 Canal 10 Bit 0-5V ADC buffered and terminated at 20 pin FRC connector.
  • 20X4 Alphanumeric LCD Display
  • 4 switches provided for user input.
  • Reset switches provided for hardware reset
  • 1 UART is terminated at 9 pin connector

SRM Power Module

  • 8no’s of latest IGBT and 8no’s of Fast recovery Diode  with heat sink forms split DC link power circuit for SR Motor control.
  • 1 no. single phase diode bridge rectifier with capacitor provided for input AC to DC conversion for power circuit
  • Capacitor provided for SRM power circuit.
  • High speed opto provided for all IGBT PWM isolation
  • 1 no. DC analog Voltmeter provided for voltage measurement.
  • 1 no. over current trip circuit with indicator and reset switch provided for protection.
  • 4 no’s of Hall Effect Current sensor with signal conditioning circuit provided for output.
  • 4 no’s of LED provided in front panel for SR position status indication.
  • 4 no’s of LED provided in front panel for indication of pulses.
  • Test points provided in the front panel for PWM and current waveform measurement.
  • 1 no of illuminated rocker switch provided for Power ON/OFF with fuse protection.
  • All are mounted in stylish metal cabinet with sticker front panel.
  • Provision for external controller pulse input.

Motor 

  • 1HP
  • 120V 
  • 4 Phase SRM
  • 8/6 Pole
  • 3000 RPM
  • Motor with loading arrangements
  • Inbuilt Position Sensor 

Bundle Contents

  • DSPIC30F4011  Board
  • Motor with loading arrangements
  • PS-PED-SRM
  • RS232 Cable
  • Power Adaptor & Power card
  • Patch cards
  • CD: Manual, MPLAB IDE, Example Codes

Mimic Diagram

 

Front Pannel Details:

 

Schematic for Four Phase SRM Power Circuit

 

 

 

Key Functions

                   Key 1:  Increment (Set/Duty)

                   Key 2:  Decrement (Set/Duty)

                   Key 3:  Enter function.

 

Four Phase SR MOTOR Inductance Profile

*This readings are varied depends on the motor

Four Phase SR MOTOR Inductance Profile Graph

 

  * This inductance profile graph varied depends on Motor.

 

 

 

 

Additional information

Weight 50.000000 kg

Reviews

There are no reviews yet.

Be the first to review “Switched Reluctance Motor Control Development Kit”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.