Description

Abstract

Normally in human life, they need water. Without water, they can’t survive their lives. That why in this project we created one method to find the drinking water and one more future if the water is drinkable than only water is separated to the water tank and the sensor value is uploaded to the Android application. In this method, we used the sensor’s PH sensor and water level sensor. The PH sensor is using to find the drinkable, water level in the water tank, and temperature value. We added three water tanks and one main water tank . in that main tank only we fixed the PH sensor and water level sensor fixed in the remaining three water tank If anyone tank water level is reduced means forms the main tank the water will be filled automatically.

Proposed System

This system is consists of testing water that is drinkable or not. If water is drinkable means the main water tank has separated the water into the public water tank and sensor value is uploading to the Android application. This application is available on the play store.

Introduction

Nowadays the world water problem is a big issue. That why we created this method to find drinkable water. In this method the main water tank and three public water tanks. In the main water tank, we kept three water pump motor to pump the water into the public water tank. This process is automatically done by the microcontroller. Normal drinking water value in India is 6.5 to 8.5 if the main water tank value is between into 6.5 to 8.5 only the water will transport to the public water tank in public water tank water level is reduced means form the main tank the water will fill automatically in this method and value are uploading by microcontroller into Android application.

Block Diagram

Block Diagram Description

• In this block diagram sensors are connected to the node MCU esp8266. One main water tank and three public water tanks.
• The pump motor is using to pump the water in the main water tank in this project
• PH sensor is using measure the PH value in water in the main water tank.
• The water level sensor is using to find the water level in a public water tank. Same process on the author water tanks.
•  All value is uploading to the Android application

Hardware Required

• Nodemcu esp8266
• PH sensor
• Water level sensor
• Pump motor
• Relay

Software Required

• Arduino IDE
• Android application