Description

Abstract

Water pollution is one of the biggest fears of green globalization. In order to ensure the safe supply of the drinking water the quality needs to be monitor in real time. In this paper, we present a design and development of a low-cost system for real-time monitoring of the water quality management in IOT. The system consists of several sensors that are used to measuring physical and chemical parameters in the water. The parameters such as temperature, PH, turbidity, the Level sensor of the water can be measured. The measured values from the sensors can be processed by the microcontroller. The Nodemcu esp8266 can be used as a core controller. Finally, the sensor data can be uploading on the internet using the WI-FI module.

 Block Diagram

Demo Video

               

Block Diagram Description

In this project, we are using the PH sensor to measure the water quality and the measured value is stored in microcontroller Nodemcu esp8266.  The sensor value is uploading to web page

Hardware Required

• Nodemcu esp8266
• PH sensor

Software Required

• Arduino IDE
• Local Host

Conclusion

This system is very effective in monitoring water quality continuously because it is fully automated. It can be tested very easily with any water. This system is a very good example of remote water quality