IOT based Underground Cable Fault Detector using Arduino

Call for Price

Normally underground cables using transmits the power. If that cable gets any damage means we have to check to start to end. But in this project, we developed on the method we monitoring the cable in IoTIf any damage will happen means the particular place find in IoT cloud

Shipping: 4 to 8 working days from the date of purchase

Package Includes:

  • Complete Hardware Kit

  • Demo Video-Embedded Below

  • Abstract

  • Reference Paper

  • PPT (20 Slides)

  • !!! Online Support !!!

SKU: IOT based Underground Cable Fault Detector using Arduino Category:

Description

Abstract

Underground cables area unit at risk of a good style of faults thanks to underground conditions, wear and tear, rodents, etc. additionally police investigation fault supply is tough and also the entire line is to be mammary gland so as to see the whole line and fix faults. Therefore here we tend to propose cable fault detection over IOT that detects the precise fault position over IoT that creates repairing work terribly straightforward. The repairmen understand specifically that half encompasses a fault and solely that space is to be mammary gland to observe the faulty supply. This protects heaps of your time, cash and energy and additionally, permits America to service underground cables quicker. We tend to use IOT technology that permits the authorities to observe and check faults over the web. The system detects a fault with the assistance of a possible divider network set across the cable. Whenever a fault gets created to some extent shorting 2 lines along, a selected voltage gets generated as per the resistors network combination. This voltage is detected by the microcontroller and is updated to the user. The data sent to the user is that the distance to that voltage corresponds to. The microcontroller retrieves the line information and shows over the alphanumeric display, additionally, it transfers this information over the web to show online. We tend to use IOT Gecko to develop the online the web the net system that links with the system to show the cable faults online.

Proposed System

  • Normally underground cables using transmits the power. If that cable gets any damage means we have to check to start to end.
  •  But in this project, we developed on the method we monitoring the cable in IoT
  • If any damage will happen means the particular place find in IOT cloud

Block Diagram

block diagram of IOT based Underground Cable Fault Detector using Arduino

Hardware requirements

  • Arduino Uno
  • Esp8266
  • Relay driver
  • Switch
  • LCD display

Software requirements

  • Arduino IDE
  • Embedded C

Additional information

Weight 1.000000 kg

Reviews

There are no reviews yet.

Be the first to review “IOT based Underground Cable Fault Detector using Arduino”

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.