IoT Based Three Phase Induction Motor Speed Control and Monitoring

In stock
SKU
IoT-Three Phase Induction Motor Speed Control and Monitoring
Quick Overview

IoT Based Three Phase Induction Motor Speed Control and Monitoring

Package Includes:

  • IoT based Three phase induction motor speed control Kit

  • Demo Video

  • Abstract

  • Reference Paper

  • source code

  • !!! Online Support !!!

  • Delivery in 5 working days

  • Inclusive of Tax

Call For Price

Secured and trusted checkout with

ABSTRACT

This project is proposed to control and monitor the speed of the three-phase induction motor by using the Arduino and node MCU controller. The Arduino controller is used to produce the pulse width modulation (PWM) signals. And the motor speed is control by using the driver and three-phase inverter circuits. And also this project has reduced the harmonics and switching losses of the circuit. In this project have Node MCU is used to increment and decrement the speed of the induction motor. The speed feedback is connected to Node MCU controller. The Node MCU transfer the speed signal through wifi.

BLOCK DIAGRAM

IOT based 3 phase induction motor monitoring and controlling

DETAILS FOR 3 PHASE INVERTER BOARD

The inverter card comes with an inbuilt full bridge rectifier and filter capacitor. 6 No’s of IRFP250 MOSFET’s are mounted with the Heat sink. The output of the inverter is terminated with 3 pin PTB Connector. The user should get soldered on the back side of the board for gate pulse interface. 

➣6 No’s of IRFP250 MOSFET are mounted with a proper Heat sink

➣5A Bridge Rectifier with DC Filter Capacitor (1000uF/250V)

3 Pin PTB Connector provided to connect Motor

iot-based-induction-motor-speed-control-monitoring

iot-based-induction-motor-speed-control-monitoring

SPECIFICATIONS 

➣6 No’s of IRFP250 MOSFET with Heat sink 

➣Input Voltage 100V/AC/50Hz

➣Operating Frequency 25 KHz

➣Input and Outputs are terminated with PTB Connectors

TLP 250 DRIVER BOARD

SPECIFICATION 

➣6 No’s Opto-Isolated Gate Drive

➣Input Voltage 12V/AC/50Hz

➣Operating Frequency 25 KHz

➣All input and outputs are terminated with RMC Male Connectors

iot based three phase induction motor speed control and meaurements

INTERRUPT PINS

FUNCTION

ARDUINO CONTROLLER

Node mcu controller

INCREMENT

2

D2

DECREMENT

3

D3

PWM OUTPUTS

PWM OUTPUTS

ARDUINO CONTROLLER

POWER SWITCH

(As in inverter schematic diagram)

PWM 1

4

Q1

PWM 2

5

Q6

PWM 3

6

Q3

PWM 4

7

Q2

PWM 5

8

Q5

PWM6

9

Q4

MOTOR OUTPUT

INVERTER BOARD

MOTOR COLOUR

PHASE 1

RED

PHASE 2

YELLOW

PHASE 3

BLUE









NODE MCU CONTROLLER

NODE MCU CONTROLLER

SPEED SENSOR

VCC

BROWN

D7

BLACK

GROUND

BLUE

CONNECTION DIAGRAM OF NODE MCU AND SPEED SENSOR

IoT- Based-Three-Phase-Induction-Motor-Speed-Control-and-Monitoring

CONNECTION DIAGRAM

IoT- Based-Three-Phase-Induction-Motor-Speed-Control-and-Monitoring

OUTPUT WAVEFORMS

iot-based-induction-motor-speed-control-monitoring

Comparison of two Pulses

IoT- Based-Three-Phase-Induction-Motor-Speed-Control-and-Monitoring

Phase to Phase Output of Inverter

IoT- Based-Three-Phase-Induction-Motor-Speed-Control-and-Monitoring

Comparison of Inverter Output


For more Power Electronics Projects Click Here

0
Rating:
0% of 100
Write Your Own Review
You're reviewing:IoT Based Three Phase Induction Motor Speed Control and Monitoring
Quote Inquiry Form

Write a descriptive message about what you are inquiring.