Abstract
This paper consist of sunlight energy normally the light energy is converted into electrical energy using a solar panel. But after one month the solar panel energy is reducing why means the dust was glaze on the solar panel output power is low. In this project, we created one great solution for a solar power plant we analyzing the output power solar panel. If power is low means the dc motor will clean the dust on panel and output power value is uploading to the IoT cloud using Nodemcu ESP8266 microcontroller.
Existing System
- Before there is no analyzing function on the solar power plant and automation function also not used in a solar power plant.
Proposed System
In this project, we created an automation function on this proposed system. If the solar panel output power is low means the DC motor will clean the panel automatically and the output power was uploading to the IoT cloud.
Block Diagram
Hardware Requirements
- Nodemcu ESP8266
- Solar Panel
- DC Motor
- Current Sensor
- Voltage Sensor
- Cleaning Setup
Software Requirements
- Arduino IDE
- Embedded-C
- IOT-Cloud