Description

Abstract

Two types of farming first Rain-fed farming is the natural application of water to the soil through direct rainfall. Counting on rainfall is a smaller amount likely to end in contamination of food products but is hospitable water shortages when rainfall reduced. On the opposite hand, artificial applications of water increase the danger of contamination. The Irrigation system is the artificial application of water to the soil through various systems of tubes, pumps, and sprays. Irrigation typically utilized in areas where rainfall is irregular or dry times of drought predicted. There are many sorts of irrigation systems, during which water supplied to the whole field uniformly. The Irrigation system water can come from groundwater, through surface water or wells, springs, through reservoirs, or rivers, lakes, or maybe other sources, like treated wastewater or desalinated water. As a result, it is critical that farmers protect their agricultural water source to attenuate the potential for contamination.

concept: 

In the mothed when the soil moisture sensor is detected at the same time pump motor is also get on condition this all monitored through blynk application.

Typical Applications

• Surface irrigation
• Localized irrigation
• Drip irrigation
• Sprinkler irrigation
• Center pivot irrigation
• Lateral move irrigation
• Sub-irrigation
• Manual irrigation

Block diagram

Components Required

• ESP8266
• Soil moisture sensor
• Relay with a pump motor
• Lithium Polymer battery