Abstract
In this project, we monitoring the industrial devices why means most of the disaster happening in industrials only. Temperature, pressure, level sensor, and gas sensor are all are using avoid the disaster in industrials. The sensor value is monitoring on the Ubidots website. Nodemcu ESP32 is used to collect the data in the sensor and then sensor value is uploading to a website. ESP32 is are advanced microcontroller board comparing the same ESP females. In this project, we using the MQTT protocol in-between sensor to website. The MQTT protocol is easy user-friendly this all is used to protect the industrial.
Proposed System
This paper consists of protecting industrial devices and employs using sensor-based methods. In these methods, we monitoring the temperature, pressure level, gas level, and oil level this is the most dangerous in industrial. Monitoring value is displayed on the Ubidots website using the MQTT protocol method to avoid the disaster in industrials.
Block Diagram
Hardware Requirements
- Nodemcu ESP32
- Temperature Sensor
- Gas Sensor
- Level Sensor
- Pressure Sensor
Software Requirements
- Arduino IDE
- Embedded-C
- Ubidots Website
- MQTT protocol