Forums Wireless Communication GSM Modem Using GSM/GPRS with Internet of Things

Using GSM/GPRS with Internet of Things

Link to this post 11 Dec 14

Hi, I need some advice. I want to use GSM/GPRS modem with internet of things i.e, sending the information of any sensor or peripheral(its state or operating condition) to HTTP, so that I can monitor the work remotely from internet using some website. Your help would be highly appreciated.

Salman Ali

Link to this post 11 Dec 14

You could use for free server,you could create a free account,they have provided api on their website,all you have to pass the data to the server as mentioned in the api.

Link to this post 12 Dec 14

Thanks for the reply. Can I know how to send data to that server ? If you can provide some example code for that I would be very much thankful to you.

Link to this post 13 Dec 14

these are some of the AT commands used for sim900 module,

AT+SAPBR=3,1,"Contype","GPRS" AT+SAPBR=3,1,"APN",""
let me know the Module you use.

Link to this post 15 Dec 14

Module : Telit GL868-Dual V3

Link to this post 15 Dec 14


Find the attached documents,may its useful for your projects(included all AT commands).

  1. Telit_Modules_Software_User_Guide_r15.pdf
Link to this post 17 Dec 14

Thanks for your response. I have gone through this file and few other user guide. I am confused after seeing so many at commands. I would be glad if any one tell me the steps/procedure for sending data to my server using http client. There are few commands like
AT#HTTPCFG, AT#HTTPSND etc that i can use but I want proper steps right from taking data from UART register and sending that data to HTTP server using gsm module.

Link to this post 18 Dec 14

Sorry we don't have telit modules to work on .