Fault Monitoring By Using Sensor Nodes in an Internet of Elevators
Call for Price
In our system used to the signal processing unit to monitoring the elevator door. Accelerometer we used to detect any acceleration of the elevator. By using the IoT we will update and monitor the entire status of the elevator.
Shipping: 4 to 8 working days from the date of purchase
Complete Hardware Kit
Demo Video-Embedded Below
PPT (20 Slides)
!!! Online Support !!!
This project concept is using to monitor the condition of elevator and condition and fault detection and checking by using Internet and sensor nodes We find a fault in an elevator by using the sensor and send to the entire details to the IoT and there we going to monitor the current of the elevator. The main motto of this concept we going continuously communicate with the controller and detect the problem and make a solution as well as quick. Why because without checking the condition of the elevator we get the maximum problems. In an existing system, they just monitor the problem of the elevator they didn’t take any solution to control this problem. But this paper will monitor the entire details of this elevator make an alert and give the solution to the problem instantly. In this project, we monitor the used signal processing for the detection acceleration in an elevator by using the accelerometers and overload measurement we use load cell and finally, we used a vibration sensor for the unwanted vibration values form the elevator. We passing the signal from the door by the purpose acceleration monitoring in an elevator if we get any acceleration means it gives the alert to the service station and updates the data from the website by using the Internet.
- In the existing system only monitor the elevator
- There is no signal processing unit for this exiting method.
- In our system used to the signal processing unit to monitoring the elevator door.
- Accelerometer we used to detect any acceleration of the elevator.
- By using the IoT we will update and monitor the entire status of the elevator.
- Load Cell
- Vibration sensor
- Arduino IDE
- Embedded c
- More accuracy for fault detection.
- Easy to transfer data from the others.
- More security for the controlling system.
There are no reviews yet.