You have no items in your shopping cart.

Subtotal: 0.00

Aim

To Generate a Square wave form using TMS320C6745 DSP KIT.


Requirements


 
Theory

Square waves have an interesting mix of practice and theory. In practice, they are extremely simple. In their simplest form, they consist of an alternating sequence of amplitudes; e.g. high/low or 1's and 0's.


The same high / low logic here we implented in experiment. For particular duration the high state is out , then low state is out. Finally square wave is generated and plotted in code composer studio Graph.


Procedure

1. Open Code Composer Studio v4 .


2. In WorkSpace Launcher.


  • BROWSE → Select the project location and make one new folder, MAKE NEW FOLDER → Type the Workspace name, OK → OK.

3. FILE ⇒ NEW ⇒ CCS PROJECT


  • Project name: Type your project name.
  • Tick use default location. → NEXT
  • Project type C6000.
  • Tick Debug And Release. → NEXT → NEXT.
  • Output type: Executable.
  • Device Variant : generic - TMS320C6745.
  • Device Endianness : little
  • Code Generation Tools: TI v6.1.12.
  • Run time support library: automatic.
  • Target content: none. →FINISH

4.FILE ⇒ NEW ⇒ SOURCE FILE

  • Source file: Type your projectname.c( .c extension is must ).
  • Type the program.
  • FILE → SAVE.

5. Paste the following board library files in workspace location.


  • Common folder (contains header files)
  • Gel folder (contains gel file)
  • Library folder(contains library files)

6. Paste the Linker file in the project location.(linker file is available in cd)


Note: Those folders and linker file are availble at cd.


7. PROJECT ⇒ PROPERTIES ⇒ C/C++ BUILD → BASIC OPTION


  • Target processor version(--silicon version, -mv)    :   6400+ OK.
  • IN C/C++ BUILD, INCLUDE OPTIONS (Add dir to #include search path(--include_path,-I)) select this add iconadd iconand add the following three path by indivdually
       -  "${Diag}../../common/header"
       -  "${XDAIS_CG_ROOT}/packages/ti/xdais"
       -  "${C6000_CSL_CG_ROOT}/include"

8. FILE ⇒ NEW ⇒ TARGET CONFIGURATION FILE


  • file name: projectname. ccxml (.ccxml extension is must)
  • Connection: Texas Instrument XDS100 v1 USB Emulator.
  • Device: TMS320C6745. (Tick the <TMS320C6745)→ SAVE → TARTGET CONFIGURATION → C674X_0 → BROWSE, browse the workspace location, open the gel folder and select the GEL file. → OPEN → SAVE.

9. In C/C++ Project window, Right click the project ⇒ REBUILD PROJECT.


10. Connections


  • Connect the usb cable, PC to TMS320C6745 KIT.
  • Connect the 5v adapter.
  • Power on the kit.

11. TARGET ⇒ DEBUG ACTIVE PROJECT.


12. TARGET ⇒ RUN. (wait few seconds generate samples)


13. TARGET ⇒ HALT.


14. TOOLS ⇒ GRAPH ⇒ SINGLE TIME


  • Acquirstion buffer size : 1000
  • Index increment : 1
  • Start address : 0xC0000000.
  • Display data size : 1000 → Ok.

Program

 

#include <stdio.h>

#include <math.h>

void main()

{

        int *Square;

        int i;

        Square = (int *)0xC0000000;

        while(1)

        {

                for(i=0;i<50;i++)

                {

                        *Square++ = 0x0000FFFF;

                }

                for(i=0;i<50;i++)

                {

                        *Square++ = 0x0;

                }

        }

}

 


Result

Thus, the Square waveform was generated and samples is stored at memory location(0xC0000000).