DFT 4 Point using TMS320F2812 DSP

DFT 4 point using TMS320F2812 DSP

Tags: DFT 4 point implementation using TMS320F2812 , dft4 point,dft 4 point source code,
Overall rating


To perform the 4 point DFT process from a given discrete sequence in TMS320F2812 KIT.


  • CCS v3.3
  • TMS320F2812 KIT
  • USB Cable
  • 5V Adapter


The sequence of N complex numbers x0, ..., xN−1 is transformed into another sequence of N complex numbers according to the DFT formula


It transforms one function into another, which is called the frequency domain representation, or simply the DFT, of the original function (which is often a function in the time domain).

The DFT requires an input function that is discrete. Such inputs are often created by sampling a continuous function, such as a person's voice. The discrete input function must also have a limited (finite) duration, such as one period of a periodic sequence or a windowed segment of a longer sequence. Unlike the discrete time Fourier transform (DTFT), the DFT only evaluates enough frequency components to reconstruct the finite segment that was analyzed. The inverse DFT cannot reproduce the entire time domain, unless the input happens to be periodic. Therefore it is often said that the DFT is a transform for Fourier analysis of finite-domain discrete-time functions.


Note: Once you install the Code Composer Studio v 3.3 software, the two icons will display in desktop

  • Setup Code Composer Studio v3.3
  • Code Composer Studio

1. Open Setup Code Composer Studio v3.3.

2. In System Configuration, select the board then → Remove all → yes.

  • In family, select C28xx.
  • In platform, select xds100 usb emulator.
  • In Endianness, select little.
  • Select F2812 XDS100 USB Emulator → add → save & quit → no.

Note: The above two steps only for first time to setup the processor in CCS.

3. Open Code Composer Studio v3.3.

4. Project → New.

  • Project name: type the project name.
  • Location: Browse, select the project location .
  • Project Type: Executable(.out)
  • Target: TMS320C28XX. Finish.

5. File → New → Source file.

  • Type the program in untitled window.

6. File → Save.

  • Browse our project location then type our project name.c ( .c extension is must) save.

Paste the following two cmd files in our project folder.

  • F2812_EzDSP_RAM_lnk.cmd
  • DSP281x_Headers_nonBIOS.cmd
  • DSP281x_GlobalVariableDefs.c

8. Project → Add files to project.,

  • In file of type : All files
  • Ctrl + Select the following files
           DSP281x_Headers_nonBIOS.cmd open.

9. Project → Build Option.

In compiler tab, select Preprocessor

  • Include search path(-i): C:\tidcs\c28\DSP281x\v120\DSP281x_headers\include

In linker tab, select libraries

  • Search path(-i): C:\CCStudio_v3.3\C2000\cgtools\lib
  • Incl libraries(-l): rts2800_ml.lib.

In linker tab, select Basic

  • Stack Size(-stack): 0x400 ok.

10. Project → Build (or) Rebuild all.

11. Connections for TMS320F2812 kit

  • Connect 5v adpter to TMS320F2812 kit.
  • Connect usb cable to TMS320F2812 kit from pc.
  • Power on the TMS320F2812 kit.

12. Debug → connect.

13. File → Load Program → Browse and select the projectname.out file → open

14. Debug → Go main.

15. View → memory

  • Enter An Address :0x3F9100 Enter.
  • Type the input.

For example

  • 0x3F9100 – 0x0001
  • 0x3F9101 – 0x0001
  • 0x3F9102 – 0x0001
  • 0x3F9103 – 0x0000

16. Debug → Run.

17. Debug → Halt

18. See the output at following location, View → memory

Enter An Address:0x3F9110 → Enter.

For example

  • 0x3F9110 – 0x0003
  • 0x3F9111 – 0x0000
  • 0x3F9112 – 0x0001
  • 0x3F9113 – 0xFFFF (-1)

19. View → memory

Enter An Address:0x3F9120 → Enter.

  • 0x3F9120 – 0x0000
  • 0x3F9121 – 0xFFFF (-1)
  • 0x3F9122 – 0x0000
  • 0x3F9123 – 0x0000



#include "DSP281x_Device.h"


#define xn 4

#define hn 4


void main()


        int *xval,*outval,j;

        int n,k,i,t[100]={0};


        xval = (int *)0x003F9100;  /* input  */

        outval = (int *)0x003F9200; /* output */




                outval[i] = 0;






                t[i] = xval[j];





                        outval[n] = (outval[n])+((xval[k])*(t[n-k]));






Thus, the 4 point DFT of given discrete sequence has performed and the result is stored at memory location(0x3F9110 & 0x3F9120).

Join the World's Largest Technical Community

we respect your privacy.