Description

Abstract

This project presents the bus stop remainder using the RF reader. From this RFID we can remain the bus number to the blind person at the bus stop. It will use full for the blind person I cities side Arduino Uno microcontroller is using read the value form RFID when the bus will come nearby bus stop means the RFID reader will read the tag number each tag have a separate number in this project that number should be played  voice recording module and one more future was added in this project bus routes also played by voice recorder. The LCD display displayed the last reached bus number it will use full for a normal person of cities

Introduction

The idea for the blind and normal passenger of cities. In this remained after the bus stop in the stop. Voice recorder automatically speaks out the bus stop number and routes. This all developed by Arduino Uno and RFID reader and voice recorder and LCD display.

Existing System

In the existing system, the Location of the bus is not known, thus we need to ask the bus information for respective persons. Chances of missing bus stop are more.

Proposed System

In this proposed system, we are expecting to remind the bus stop of the bus and let the users know the location. So that one can manage their time efficiently and get the reminder just before the bus arrives or take an alternate means of transport if they miss the bus stop or they are running late.

Block Diagram 

Block Diagram Description

• RFID is connected with Arduino Uno when the tag read from RFID reader that time speaker will speak the bus number at the same time bus number will display on LCD
• From voice recorder already we record the bus number in the module.
• 16*2 LCD display we used to display the bus number in the project

 

Hardware Requirements

• Arduino Uno
• LCD display
• Voice recorder
• Speaker

Software Requirements

• Arduino IDE
• ORCAD Design