You have no items in your shopping cart.

Subtotal:Rs.0.00
Latest Technology Products

LOGi FPGA Development Board for Raspberry Pi – Beaglebone

logi-fpga-development-board1

 LOGi-Bone Features: 

 

  • Xilinx Spartan 6 LX9 TQFP-144 FPGA 9,152 Logic Cells, 16 DSP48A1 Slices, 576Kb RAM
  • Beaglebone Black Optimized 4 Layer Optimized Design to Support Maximum Performance of High Bandwidth Applications Length-tuned GPMC, SDRAM, LVDS Signals 3.3v I/O Regulator and 1.2v Core
  • Regulator 256 Mb SDRAM connected to the FPGA
  • 2x LEDs 2x Push Buttons 2x DIP Switches
  • 1x High Bandwidth SATA connector expansion port, Length tuned and impedance routed differential signals for maximum bandwidth (Designed for modular LVDS expansion, Not SATA devices – see FAQ on SATA connector)
  • 2x Digilent Inc. PMOD ports supporting 59+ plug-and-play hardware modules
  • 1x Arduino compatible headers connected to the FPGA pins (3.3V only) Supports over 200+ Arduino Shield Modules
  • Optional GPMC, SPI or I2C port access from the Beaglebone Black
  • 10x Length-tuned LVDS Pairs
  • Bit-Stream loading interface connected to the host processor, optional bitstream FPGA self-loading from onboard Flash.

 

 LOGi-Pi Specific Features

 

  • Xilinx Spartan 6 LX9 FPGA 9,152 Logic Cells, 16 DSP48A1 Slices, 576K RAM
  • Plug-and-Play Interfacing for the Raspberry Pi 4 Layer Optimized Design to Support Maximum Performance of High Bandwidth Applications Length-tuned GPMC, SDRAM, LVDS Signals
  • 3.3V I/O Regulator and 1.2V Core Regulator
  • 256 Mb SDRAM connected to the FPGA
  • 2x LEDs 2x Push Buttons 2x DIP Switches
  • 1x High Bandwidth SATA connector expansion, port Length tuned and impedance routed differential signals for maximum bandwidth (Designed for modular LVDS expansion, Not SATA devices – see FAQ on SATA connector)
  • 2x Digilent Inc. PMOD ports supporting 59+ plug-and-play hardware modules
  • 1x Arduino compatible headers connected to the FPGA pins (3.3V only) Supports over 200+ Arduino Shield Modules
  • 10x Length-tuned LVDS Pairs 32 FPGA I/O available through PMOD and Arduino headers
  • Connection to the SPI Interface of the Raspberry Pi (3.8 MBps maximum Bandwidth)
  • Connection to 16 I/O of the Raspberry Pi expansion port (including SPI, UART, I2C and GCLK and GPIO).
  • Bit-Stream loading interface connected to the host processor, optional bitstream FPGA self-loading from onboard Flash.
Tags : LOGi FPGA Development Board
Pantech

The author Pantech