You are currently viewing Choose the Right Board of TMS320F2812 for Specific Application

Choose the Right Board of TMS320F2812 for Specific Application

Spread the love

Objective

The objective of this blog to know how to choose the right board of TMS320F2812 for your specific motor/signal control application.

List of the TMS320F2812 boards available

Overview of TMS320F2812 boards

The TMS320F2812 is the Main CPU of all the three boards. TMS320F2812 device is the member of TMS320C28x DSP generation from the Texas Instrument Manufacturer. It is highly integrated and high performance solutions for demanding control applications.

 

For various control application TMS320F2812 CPU is required by the most of the user, accordingly we providing the TMS320F2812 boards in three category. All the three TMS320F2812 boards are work in the 125 MHz clock frequency, only the different is expansion connector, and the additional peripheral interfaced on boards.

 

Comparison of TMS320F2812 Boards

 

Particulars

TMS320F2812 Stick Board

TMS320F2812 Starter kit

TMS320F2812 Development Board

Core Voltage

1.8v

1.8v

1.8v

I/O Voltage

3.3v

3.3v

3.3v

ADC VREF

3.0v

3.0v

3.0v

SYSCLKOUT

Up to 125Mhz

Up to 125Mhz

Up to 125Mhz

FLASH

128K Available

128K Available

128K Available

JTAG Connector

Available

Available

Available

GPIO

All the 56 GPIO’s are terminated

All the 56 GPIO’s are terminated in individual PORT expansion connector

All the 56 GPIO’s are terminated in individual PORT expansion connector

EVA – PWMA0-A7

8 PWM Pins are terminated

8 PWM Pins are terminated in Expansion Connector

8 PWM Pins are terminated in Expansion Connector

EVA – CAP1-3

3 CAPTURE Pins are terminated

3 CAPTURE Pins are terminated in expansion connector

3 CAPTURE Pins are terminated in expansion connector

EVA – CTRIP1-3

3 COMPARE OUTPUT TRIP Pins are terminated

3 COMPARE OUTPUT TRIP Pins are terminated in expansion connector

3 COMPARE OUTPUT TRIP Pins are terminated in expansion connector

EVB – PWMB0-B7

8 PWM Pins are terminated

8 PWM Pins are terminated in Expansion Connector

8 PWM Pins are terminated in Expansion Connector

EVB – CAP4-6

3 CAPTURE Pins are terminated

3 CAPTURE Pins are terminated in expansion connector

3 CAPTURE Pins are terminated in expansion connector

EVB – CTRIP4-6

3 COMPARE OUTPUT TRIP Pins are terminated

3 COMPARE OUTPUT TRIP Pins are terminated in expansion connector

3 COMPARE OUTPUT TRIP Pins are terminated in expansion connector

BOOT MODE

Jumpers are available to choose the BOOT MODE

Jumpers are available to choose the BOOT MODE

Jumpers are available to choose the BOOT MODE

XDS 100 USB V1 EMULATOR

On Board

On Board

On Board

LED Output

2 no’s of LED On Board

8 no’s of LED On Board

8 no’s of LED On Board

SWITCH Input

1 no’s Push Switch On Board

8 no’s of DIP Switch On Board

8 no’s of Push Switch On Board & also additional 4 no’s Slide Switch On Board.

UART – SCIA

TX and RX lines are terminated.

It have a provision to connect 2nd channel of FT2232 so can transmit and receive via Emulator USB Port

TXand RX lines are terminated in with MAX232 driver with 9 Pin serial port connector.

Also terminated in expansion connector

TXand RX lines are terminated in with MAX232 driver with 9 Pin serial port connector.

Also terminated in expansion connector

UART – SCIB

TX and RX lines are terminated.

It have a provision to connect 2nd channel of FT2232 so can transmit and receive via Emulator USB Port

TXand RX lines are terminated expansion connector

TX and RX lines are terminated in with MAX232 driver with 9 Pin serial port connector.

Also terminated in expansion connector

EXTERNAL SRAM

Only Microcontroller Mode no external SRAM is available.

Selection Jumper is available whether to work as Microcontroller or Microprocessor Mode.

SRAM is available to work as Microprocessor.

Only Microcontroller Mode no external SRAM is available.

12-bit ADC

Available

Available

Available

ADC PINOUT

ADCA0-A7 & ADCB0-B7

Only 4 Pins are terminated.

All the 16 Pins are terminated in individual expansion connector.

All the 16 Pins are terminated in individual expansion connector.

ADC INPUT

***

4 no’s 3v Trim potinput is available for dedicated ADC Pins

4 no’s 3v Trim pot input is available for dedicated ADC Pins

12-bit SPI DAC

*

*

It has 12-bit DAC to generate any external analogue signal.

SPI EEPROM

*

*

128/256K SPI EEPROM Memory is available.

CAN

*

*

CAN transceiver is available to communicate.

BUZZER

*

*

Buzzer interface is available to be use as an alarm when required.

RELAY

*

*

Relay interface is available to use ON/OFF the External circuit when required.

16×2 Numeric Display

*

*

16×2 Numeric Display is available to displaythe content.

ADDRESS BUS

**

**

Address bus lines are terminated in expansion connector.

DATA BUS

**

**

Data bus lines are terminated in expansion

connector…

TMS320F2812 DSP starter kit

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.