PART NO: PS-HC05BLUEBEE
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2
- Sensitivity: ≤-84dBm at 0.1% BER
- Typical -80dBm sensitivity
- Up to +4dBm RF transmit power
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
- Security: Authentication and encryption
- Profiles: Bluetooth serial port
- UART interface with programmable baud rate
- 1 No. Push switch for AT command
- 2 No LED for Communication Status
- XBEE Compatible*.
- With integrated antenna
- With edge connector
- Power supply: +3.3VDC 50ma
- Working temperature: -20 ~ +75Centigrade
- Dimension: 26.9mm x 13mm x 2.2 mm
- Supported baud rate: 9600,19200,38400,57600,115200,230400,460800
- PIO10 and PIO11 can be connected to red and blue led separately. When master and slave are paired, red and blue led blinks 1time/2s in interval, while disconnected only blue led blinks 2times/s.
- Default Baud rate: 38400(AT Command), Data bits:8, Stop bit:1,Parity:No parity, Data control: has.
- Default Baud rate: 9600 for communication between Master and Slave.
- HC-05 Module
- User Manual/Datasheet.
- Computer and peripheral devices
- Replacement of Wired Serial Bus.
- Industrial control
- MCU Projects
* Only VCC, GND, TX and RX pins compatible