Automatic Street Light Control System Using Microcontroller

Call for Price

Automatic Street Light Control System Using Microcontroller

SKU: Automatic Street Light Control System Using ARM Category:



Electrically powered street lighting has brought a sense of wellbeing and freedom from risk or danger but Street lights in town centers, traffic lights and pedestrian crossings stay on all night. This amount of lighting is not required in that it adds no benefit to the community. Continuous ON state of street light leds to power wastage. In other case, it is getting very difficult to analyze the failure of street lights in all places. In these kinds of situation effects of crime will be increasing. In our proposed project work we have analyzed these problems.

This Project work consists of a group of measuring stations in the street (one station located in each lamppost) and a base station located nearby. The measuring stations are used to observe street conditions as the intensity of daylight and, depending on the conditions they activate or off the lamps. For these reasons every lamp is designed independent to decide about the activation of light. The base station conjointly checks if any lamp is correctly operating and sends the information using the wireless network to the operator who will act in case of malfunction. 


  • Manually switching ON/OFF
  • Not fully Energy Efficient systems
  • Wired switching
  • No monitoring system


  • Fully automated with monitoring base station
  • Wireless systems
  • Intelligent Energy efficient system 


Street Light section

Automatic Street Light Control System Using Microcontroller 1

Monitoring section

Automatic Street Light Control System Using Microcontroller 2


  • In this project, we are doing save power saving and automatic devices control system using a sensor like PIR, LDR, and IR Senor.
  • First based on LDR sensor we are checking light intensity(daytime or night time), based on intensity light will get on and off.
  • Using the IR sensor will detect the vehicle.PIR sensor will detect a person.
  • Based on a person and vehicle light intensity will change.
  • Same time if have any load problem that will send the alert message to the monitor side.  


  •   ARM lpc2148
  •   IR Sensor
  •   LDR Sensor
  •   PIR sensor
  •   Lighting system
  •   Power supply
  •   WiFi module


  •   Compiler(KEIL IDE)
  •   Orcad design
  •   Programmers(Flash Magic)


[1] D. A. Devi and A. Kumar, Design and Implementation of CPLD based Solar Power Saving System for Street Lights and Automatic Traffic Controller, International Journal of Scientific and Research Publications, Vol. 2, Issue11, November 2012.

[2] J. Mohelnikova, Electric Energy Savings and Light Guides, Energy& Environment, 3rd IASME/WSEAS International Conference on, Cambridge, UK, February 2008, pp.470-474.

[3] M. A. Wazed, N. Nafis, M. T. Islam and A. S. M. Sayem, Design and Fabrication of Automatic Street Light Control System, Engineering e-Transaction, Vol. 5, No. 1, June 2010, pp 27-34.

[4] R. Priyasree, R. Kauser, E. Vinitha and N. Gangatharan, Automatic Street Light Intensity Control and Road Safety Module Using Embedded System, International Conference on Computing and Control Engineering, April 2012.

[5] K. S. Sudhakar, A. A. Anil, K. C. Ashok and S. S. Bhaskar, Automatic Street Light Control System, International Journal of Emerging Technology and Advanced Engineering, Vol. 3, May 2013,

Additional information

Weight 1.000000 kg


There are no reviews yet.

Be the first to review “Automatic Street Light Control System Using Microcontroller”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.