Arduino Based Automatic Plant Watering System

Call for Price

Arduino Based Automatic Plant Watering System

SKU: Automatic Plant Watering System Category:

Description

 

Abstract:

An adequate water supply is important for plant growth. When rainfall is not sufficient, the plants need additional water. We know that people do not pour the water on to the plants in their gardens when they go to vacation or often forget to water plants. As a result, there is a chance to get the plants damaged. The project I have undertaken is “Arduino Based Automatic Plant Watering System”. This project is taken up as India is an agriculture oriented country and the rate at which water resources are depleting is a dangerous threat hence there is a need of smart and efficient way of irrigation. In this project I have implemented sensors which detect the humidity in the soil (agricultural field) and supply water to the field which has water requirement. The project is microcontroller based design which controls the water supply and the field to be irrigated. There are sensors present in each field which are not activated till water is present on the field. Once the field gets dry sensors sense the requirement till the sensors is deactivated again. In case when here is more than one signal for water requirement then the microcontroller will prioritize the first received signal and irrigate the fields accordingly.

 

INTRODUCTION:

 

An adequate water supply is important for plant growth. When rainfall is not sufficient, the plants need additional water. We know that people do not pour the water on to the plants in their gardens when they go to vacation or often forget to water plants. As a result, there is a chance to get the plants damaged. The project I have undertaken is “Arduino Based Automatic Plant Watering System”. This project is taken up as India is an agriculture oriented country and the rate at which water resources are depleting is a dangerous threat hence there is a need of smart and efficient way of irrigation. In this project I have implemented sensors which detect the humidity in the soil (agricultural field) and supply water to the field which has water requirement. The project is microcontroller based design which controls the water supply and the field to be irrigated. There are sensors present in each field which are not activated till water is present on the field. Once the field gets dry sensors sense the requirement till the sensors is deactivated again. In case when here is more than one signal for water requirement then the microcontroller will prioritize the first received signal and irrigate the fields accordingly.

 

BLOCK DIAGRAM:

 

Hardware Tools

  • Arduino Uno
  • Ultra Sonic Sensor
  • BUZZER
  • Motor With Tank

Software Tools

  • Arduino IDE
  • Embedded-C

 

 

 

Additional information

Weight 1.000000 kg

Reviews

There are no reviews yet.

Be the first to review “Arduino Based Automatic Plant Watering System”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.