Home Contact Us Employee Login  
   
  | | | | |
Microcontroller Boards | DSP/DSC Boards | CPLD/FPGA Boards | Peripheral Boards | Power Electronics | Softwares
       Speech Recognition Kit
       Serial Ethernet Board
       PIC USB Programmer
       Zigbee Evaluation Board
       Bluetooth Evaluation Board
       GSM/GPRS Modem
       RFID reader
       GPS Evaluation Board
       XILINX-USB-JTAG
       XDS100 emulator
       Thermal Printer
       Interfacing cards
       Sensors
 
 
 
 
 
 

 

 
 

ZIGBEE EVALUATION BOARD

facebook
youtube
linkedin
twitter
Rss
 
Zigbee Development Board
enquiry
PART NO: PS-ACC-ZIGBEE-A
 Download Specification download Download Specification
 

The XBee 802.15.4 (formerly Series 1) OEM RF module is an IEEE 802.15.4 compliant solution that satisfies the unique needs of low-cost, low-power wireless sensor networks. It is easy-to-use, requires minimal power and provides reliable delivery of critical data between devices. No configuration is necessary for out-of-box RF communications. Advanced configurations can be implemented using simple AT commands

  XBEE Module
  • Transmitting  power output             : 1mW (0 dBm)
  • Indoor/Urban range                       : Up to 100 ft (30 m)
  • Outdoor/RF line-of-sight range        : Up to 300 ft (100 m)
  • RF data rate                                  : 250 Kbps
  • Interface Data rate                        : Up to 115.2 Kbps
  • Operating Frequency                      : 2.4 GHz | Receiver
                                                          sensitivity: 92 dBm
  Networking
  • Spread Spectrum          : DSSS (Direct Sequence Spread Spectrum)
  • Networking topology      : Peer-to-peer, point-to-point, and point-to-multipoint
  • Error handling               : Retries & acknowledgements
  • Filtration options            : PAN ID, channel and addresses
  • Channel capacity           : 16 Direct Sequence Channels (software selectable)
  • Addressing                    : 65,000 network addresses for each channel
  • Encryption                     : 128-bit AES
  Base Board Specifications
  • XBee | XBee Pro Compatible Socket
  • On-Board Voltage Regulator
  • 3 Nos of Digital Inputs
  • on-board potentiometer to test ADC.
  • RSSI Level Indicator
  • 2 Nos of I/O connector (ADC | GPIO)
  • Data Flow Indicators ( RX | TX | ASSOC)
  • Power ON status Indication LED.
  • DB9 Connector for PC or MCU Interface
  Kit Includes
  • Zigbee Module with Base Board (Xbee)
  • Communication Cable
  • CD Contains:
    Datasheets | software | App notes
 
 
    Careers | Events |