The AVR Advanced Development Board has everything you need to get
started with the Atmel AVR Microcontrollers. The kit has a rich set of hardware
features and software applications making it easy for anyone to develop embedded
systems. The handy manual has provided a complete set of schematics and software
for the AVR DB. Many real world applications can be tested on the board. Digital
Temperature controllers, Motor drivers, Memory interfacing, counters.
Block Diagram
Specification
MCU Deveices
• Atmel:
• ATmega8515/8535/16/163(Analog pin Out)
Memory
• 8K Flash – Program Memory
Clock
• 8MHz On-Board crystal
• 32KHz for Timers(Enable by DIP Switch)
On-Board
Features
• 8 Nos. Point LEDs
• 8 Nos. Digital Input(Slide Switch)
• 4x4 Matrix Keypad
• 128x64 GLCD Interface
• 2X16 Character LCD with back Light
• 10 Mbps Ethernet Interface
• 4 Nos. 7-Segment Display
• 3 Nos. Analog Input (Potentiometer)
• 1-wire Digital Temperature Sensor(DS18S20)
• VGA Adapter
• Stepper Motor Interface
• 1 No. of SPDT Relay
• I2C RTC with Batter-Backup
• 2 Nos. UART(RS232)
• USB 2.0 device interface(power supply)
• Buzzer (Alarm)
• Interrupts Study, Reset Button
• PS/2 Interface
• Serial EEPROM(I2C, SPI)
• 433.92MHz Receiver with Decoder
Communication
Protocol
• I2C, SPI,1-Wire, RS232
Power
• 9V, AC/DC- Adaptors, (+5V, 1A Regulator)
• Power form USB (+5V Only)
Connectors
• 10-pin PORT Connector
• D-SUB Connector (Serial Port, ISP)
• PTB connector (RELAY/DAC/ADC/485)
• Analog Input Connector
Others
• On-Board ICSP Programmer for Atmel Devices
• 8-Way DIP Switch for RF Rx Address Line
• Power ON/OFF Switch
Bundle Contents
Advanced Development Board
9V Adaptor
RS232 Serial Cable
USB Cable/Parallel Programming Cable
10pin FRC Interface Cable
Printed User Manual
CD Contains:
Example Codes
User Manual
Softwares & Utility
Examples
LED scrolling
Printing text on LCD
Using 4x4 Keypad and the value displayed on LCD
7seg displays in multiplex mode
Communicating with PC using UART
AD conversion and displaying on LCD
AD conversion and send conversion result via UART
Measuring temperature with DS1820 and displaying on Hyper Terminal via UART
